 |
HYDRAULIC DESIGN
WE CAN PROVIDE STANDARD OR CUSTOM
DESIGNED CIRCUITS.
Key Benefits
- Use our 23 years
of experience to design the best
system.
- Obtain parallel
engineering.
- Then let us teach
you how to accomplish the
design for the next time.
Capabilities
We have standard designs ready
to perform most hydraulic functions.
OR
We can develop custom designs
to fit your requirements.
HYDRAULIC HARDWARE
WE CAN PROVIDE THE COMPLETE
SYSTEM INCLUDING THE TANK,
OIL, ETC. OR,
WE CAN PROVIDE PARTIAL SYSTEMS,
SUCH AS MANIFOLDS, FILTERING
SYSTEMS,ETC. 
Key Benefits
- Let us be responsible
for making the system perform.
- One year warranty
on all parts and labor.
- We will work closely
with your personnel to make
sure it's right.
- AEN, Inc can replace pumps, motors, valves of all brands.
- We are an authorized parts and service center for Colly-Bombled pressbrakes and shears.
Capabilities
We can supply a complete system,
including the tank with motors,
filters and spare parts, or we
can supply components or manifolds.
HYDRAULIC
MAINTENANCE
WE CAN PROVIDE COMPLETE PM, FROM
CONTAMINATION ANALYSIS TO ON-SITE
TROUBLESHOOTING.
Key Benefits
- We have 25 years
of hydraulic experience.
- We can provide on-site
analysis of your problems.
- We will work with
your personnel to train them
to perform standard maintenance.
Capabilities
During our years in the machine
design, we have learned the
hard way about contamination,
faulty valves, broken wires,
etc. We can teach your people
how to keep your machines running
longer with preventative maintenance.
Contact us and put us to the
test.
MECHANICAL DESIGN
WE CAN PROVIDE COMPLETE MECHANICAL
DESIGN, FROM SIMPLE WELDMENTS CONSISTING
OF TWO PARTS TO COMPLEX FRAMES
WITH MULTIPLE ITEMS. WE USE THE
LATEST 3-D DRAFTING SOFTWARE, THEN
WE CAN CHECK THE DESIGN WITH FINITE
ELEMENT ANALYSIS FOR ENSURING THAT
IT IS COST EFFECTIVE AND STRUCTURALLY
CORRECT.
Key Benefits
- Our experience and
resources will allow your company
to shrink new design times.
- Using 3-D CAD, we
can quickly check part fit.
- Integrated into
our 3-D CAD is a finite element
analysis that can check
for structural integrity
and give you the strongest design for the
least amount of steel.
We have designed machines for
gauging, for moving of heavy
parts, such as dies and molds,
and machines for light to
heavy metal forming. Contact
us and see what we can do
for you!!!!
2-D OR 3-D DRAFTING
WE CAN PROVIDE COMPLETE GENERAL
DRAFTING, USING PRO-ENGINEER. WE
CAN PROVIDE 2-D FULLY DIMENSIONED
DRAWINGS READY FOR MANUFACTURING
ON YOUR FORMAT,OR FILE OUTPUT IN
VARIOUS FORMATS.
Key Benefits
- Sometimes, you
need a 3-D part or an exploded
view for your customers.
- From experience,
we know that 3-D helps
your shop people understand better.
- We can be your
temporary drafting help,
but with experience.
Capabilities
We can e-mail sketches to
several resources that can
apply time to your needs quickly.
We can be your eyes with experience to possibly advise
of issues that can be made better.
Contact us with your needs.
MOTION CONTROL
ALONG WITH HYDRAULIC DESIGN AND
HARDWARE SUPPLY, WE ARE FULLY CAPABLE
OF USING MOTION CARDS FROM DELTA
TAU TO PROVIDE MOTION PROFILING
OR POSITION CONTROL OF HYDRAULIC
POWERED SYSTEMS. THE USUAL ACCURACIES
ARE AS SMALL AS 0.0005". JUST
CLICK HERE (MOTION CONTROL) AND
LET US KNOW THE BASICS OF YOUR
NEEDS.
Key Benefits
- This is a little
understood issue with several
design characteristics that
require a knowledge
of theory, ability to perform calculations
that fit the job, knowledge
to use the right components,
and then the talent to make them perform.
- We can write the
software that can perform
all of the functions listed in Benefit 1
above.
- Then let us teach
you how to accomplish the
design for the next time.
Capabilities:
- We have controlled pressure,
position, and speed to within
2 psi, 0.0005", and 1
inch per minute, respectively.
These were for companies like
Pratt & Whitney and Lawrence
Livermore Laboratories.
- We have written software for
several machines that accounted
for oil viscosity due to temperature
change, change in pressure
drops, or load changes.
- We are
considered one of the area's
most knowledgeable people
for Delta Tau and their products
and software. Contact us
and let us move your next job
to
an exact position for success.
MOVE QUICKLY, THEN STOP PRECISELY.
METAL FORMING CONSULTATION
WE CAN PERFORM ANALYSIS OF TONNAGE
REQUIREMENTS OF V-DIE STYLE FORMING
OR DRAW FORMING.
Key Benefits
Benefit 1: Use our 23 years of experience to broaden
your choices.
Benefit 2: We have contacts or resources across the
USA.
Capabilities
We can guide you in your choices
of selecting the best machine
for your job. Deep draw, V-die
bending on pressbrakes, or
punching/blanking, these are
typical operations in which
we have been involved.
Contact us and tell us about
your system requirements.
OTHER SERVICES
IF YOU HAVEN'T SEEN A CATEGORY
THAT DESCRIBES YOUR NEEDS, CLICK
HERE (OTHER) AND TELL US WHAT YOUR
SPECIAL NEEDS ARE. MAYBE WE CAN
HELP.WE ARE ADDING SERVICES AND
EXPERTISED EVERY DAY THAT MAY NOT
BE UPDATED HERE ON THE WEB. OR,
MAYBE WE HAVE OTHER CONTACTS WHO
CAN HELP. REMEMBER, OUR GOAL IS
TO HELP YOU.
|
|
